Setting up your Raspberry pi Player
What you need
- Raspberry Pi: model 5, 4, 3, 2, 1 (We recommend the 5)
- Zero Micro SD Card: 16GB or higher write speed of class 10 or higher
- A laptop
- A working internet connection
Imaging the SD card
- Download Raspberry Pi Imager here
- Download the relevant image from Pisignage.com/downloads
- Insert your SD card into your PC and choose the custom option for OS in Raspberry Pi Imager
Please note: Do not use additional customizations such as SSH, Wi-Fi, or auto-login, as these will be configured by the PiSignage image.
Connecting your player to Wifi
Option A – Ethernet (simplest)
Plug in a network cable before powering on. The player connects by itself and you can skip to Register your player.
Option B – WiFi through the player’s hotspot
- Insert the SD card, connect the Pi to a TV over HDMI and power it on.
- If the player has no WiFi set up, it creates its own hotspot called
piplayer_XXXX. The ending is unique to each player. - On your phone or laptop, join the WiFi network
piplayer_XXXXwith the passwordpiplayer. - Open a browser and go to
http://192.168.100.1:8000. - Log in with username
piand passwordpi. - Open the WiFi settings, pick your network (or type its name), enter the password and save.
- The player switches to your WiFi and the hotspot turns off. Your phone or laptop will disconnect from
piplayer_XXXX, which is expected.
If the player later can’t reach your WiFi (for example the router is off or the password changed), the
piplayer_XXXXhotspot comes back so you can set it up again.
Option C – Keyboard on the player
Connect a USB keyboard and press Ctrl+N (or F6) to open the network menu. Choose WiFi Configuration and connect to your network, then choose Finish & Reboot.
Register your player
Once the player is online, the TV shows the welcome screen with its Player ID.
- On your laptop, log in at pisignage.com.
- Go to the Players tab and click Register.
- Enter the Player ID from the TV screen and save.
- The player appears in your list and shows as online within a minute or two. You can now assign a group and playlists.